SIZE: 12 X 3.6 X 2.44M
SPECIFICATIONS WITH LIGHT GAUGE STEEL FRAMING SYSTEMFIRE RATED AS PER NFPA-5000
The steel base frame shall be constructed from IPE
100/120 AA MS I Beam, full perimeter beams with central runner and cross
members. Spacing of transverse members=2500 mm c/c Spacing of
longitudinal members=2000 mm c/c
Lifting eyes are provided at intermediate points along with the
perimeter beams. The Base frame shall painted with 02 coat paint, one with red
oxide, one with rust free enamel paint.
Floor Frame: The Floor frame shall be constructed from MS angle
50x50x4mm welded into the base frame, making the floor assembly one integral
frame.(600mm joists spacing). The floor frame shall be grit blasted to SA2.5
and painted with 02 coat system of epoxy paint.
Floor decking: One layer of 18 mm thick cement board, fixed to the
base frame and floor frame. Bottom of the cement board is painted with
Floor finish in dry areas: High quality PVC sheet 1.5 mm fixed to 18mm thick
cement board floor. 75 x 12mm thick pvc skirting.
Floor finish in toilet &
pantry: As above.
External Finish: Fire rated 06 mm thick cement board finished with
weather proof heavy texture paint.
Internal Finish: Fire
rated 12.5mm thick gypsum board
finished with super white emulsion by Berger.
Internal Finish in Toilet
cabin: 6mm thick cement fibre board
finished with white enamel paint, partition walls are of HPL sheet 12mm thick.
Wall Framing: LGS profile framing GI studs 70 x 35 x .5mm fixed
together by screws at spacing of 610 mm vertically & 1200mm horizontally.
Wall section is supported by Integral steel frame constructed with MS
Tube 40x40x3mm welded with the base frame and trusses to provide
durability in wall section.
Internal Finish in Dry :
Fire rated 12.5mm thick gypsum board having matt enamel painted in rooms
& corridor without any visible joints on the walls.
Wet areas: 6mm thick cement board finished with oil paint.
Wall Insulation: 50mm thick Glass-wool insulation12kg/m3 density.
Roof: Trusses are constructed by
MS Angle 40x40x3mm with flat roof having the purlins of 40x40x3mm Ms angle.
Roof covering is 0.4mm thick corrugated powder coated gi sheet sides
curved as per photo attached.
False ceiling is fire rated 12.5 mm thick gypsum board painted white
emulsion. Fixed on GI furring channels fixed at 610 mm C/c. Wall height will be
2440mm. Clear height (floor to false ceiling) is 2360 mm.
External doors are 60 minutes fire rated powder coated steel sandwich
type / aluminum full frame doors with Iseo lock, door closer &
Internal doors : Semi solid wood doors / Wpvc doors size 800x2100mm.
Toilet & pantry
doors: Semi solid wood / Wpvc doors
size 700x2100mm. Door closer is to be provided only with the external
main entrance doors. Door stopper: Half round floor door stopper shall be
provided for all the doors.
Powder coated Aluminium
frame white color windows with insect screen sliding type only 6 mm thick
glass without blinds size 900 x 900mm. 7.b
400 x 400mm powder coated aluminium windows are placed for the exhaust fans and
Electrical supply: Single phase 220
volts as per requirement with D/B Panel. Make – MEM / Hager/ ABB or equivalent.
DBs are manufacture as per ADEWA standards. Elcb incomer & MCB out comer.
All wires are through PVC conduits concealed within walls. Pvc conduits
for Tel & data sockets are provided with cover plates only. 8.b
2x36w fluorescent batten type fitting – Wet Areas (Make –Selex/Frater/Eqv),
pictures attached. 2x18watt water proof IP65 lights in toilet & pantry. 13
amps and 15 amps switch socket outlets are – Legrand Brand / Tenby /
equivalent. Wires origin is – Ducab / National / equivalent. Tel & data
facets are provided with 25mm pvc conduits without cables.
Piping: Water pipes shall be PPR for cold and hot water. Drainage
pipes will be UPVC pipes. Sanitary-wares: Wash hand Basins will be pedestal
type. EWC with cistern & seat cove by Home décor or Equiv. Shower tray with
shower mixer is provided. All sanitary wares are standard white color and will
be of Home décor or Equiv brand. Model as per approval by the client.
Looking mirror, Glass / plastic mirror shelf, SS soap tray, SS towel rod, SS
coat hook is provided.
Supply & installation of kitchen
counter made with laminated ply wood finished with granite top, supply of SS
sink with mixer.
A/C UNITS 11
Ms angle support will be provided for
window A/c units and Isolator will be provided for Spilt A/c units. However the
supply of A/c unit is excluded from our scope of work. Isolator will be
provided for Spilt A/c units.